Alcatel-Lucent OmniAccess 5740 - Eth-Cfm Linktrace

eth-cfm linktrace
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
349
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
ETH-CFM LINKTRACE
eth-cfm linktrace <mac-address> mep <1-8191> domain <0-65535>
association <0-65535> [ttl <1-255>]
DESCRIPTION
This is entered in the OAM Configuration Mode. This command is used to initiate
a linktrace test.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-oam)# eth-cfm linktrace 1111.1111.1111 mep 10 domain
1 association 10 ttl 10
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
mac-address MAC address given on the interface.
1-8191 An integer, unique over a given MA,
identifying a specific MEP.
0-65535 An unique integer identifying a specific
maintenance domain.
0-65535 An unique integer identifying a specific
maintenance association.
1-255 Time to live value.
The number of hops remaining to this
LTM. Decremented by 1 by each
Linktrace Responder that handles the
LTM. One less than this value is returned
in the LTR. If 0 or 1 on input, the LTM is
not transmitted to the next hop. If 0 on
input, no LTR is returned.