Alcatel-Lucent OmniAccess 5740 - No Ip Nat {In | out; No Ip Nat Statistics {In | out | both; No Rule; Renumber

no ip nat {in | out}
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
685
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
NO IP NAT {IN | OUT}
no ip nat {in|out} <nat-name>
This command is entered in the Interface Configuration Mode. This command
detaches a NAT policy attached to an interface. This command does not delete
the NAT policy definition in its entirety. It only detaches it from its interface.
NO IP NAT STATISTICS {IN | OUT | BOTH}
no ip nat statistics {in|out|both}
This command is entered in the Interface Configuration Mode to turn off the
statistical details enabled on the interface.
NO RULE
no rule <1-65535>
This command is entered in the NAT Configuration Mode. This command deletes
the component specific to the line number specified. It deletes only that one rule in
the NAT and not the whole NAT policy.
RENUMBER
renumber
DESCRIPTION
This command is entered in the NAT Configuration Mode. Use this command to
generate a numbering scheme for the SNAT/DNAT rules configured. This
command resets the rule priorities in multiples of 10.
PARAMETERS
None.
DEFAULT VALUE
None.
EXAMPLE
ALU(config-nat-N1)# renumber