Alcatel-Lucent OmniAccess 5740 - Exclude Ip

DHCP (Dynamic Host Configuration Protocol) Server
Left running head:
Chapter name (automatic)
924
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
EXCLUDE IP
exclude ip <ip-address>
DESCRIPTION
This command is entered in the DHCP Pool Configuration Mode. This command
is used to exclude an IP address from the pool. The excluded address should
exist within the configured range.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config-dhcp-pool-p2)# exclude ip 1.2.3.65
Parameter Description
ip-address IP address with in the network range to
be excluded.