Alcatel-Lucent OmniAccess 5740 - Show Processes

show processes
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
123
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
3.0.0.82.0 Serial FR, HDLC, T1E1, SERIAL, DIALER, Wireless WAN
3.0.0.82.0 Lifeline Lifeline Management
3.0.0.82.0 VRRP Virtual Router Redundancy Protocol
3.0.0.82.0 Third-Party Third Party Utilities
3.0.0.82.0 MCAST Multicast Routing Protocol
3.0.0.82.0 WDOGMGR Hardware Watchdog Manager Sample
3.0.0.82.0 IPSec IPSec VPN service
27 Components Listed
SHOW PROCESSES
show processes
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays the CPU information.
PARAMETERS
None.
EXAMPLE
ALU(config)# show processes
PID Uid VmSize Stat Command
1 root 532 S init
2 root SW [keventd]
3 root SWN [ksoftirqd_CPU0]
4 root SW [kswapd]
5 root SW [bdflush]
6 root SW [kupdated]
7 root SW [khubd]
49 root 504 S /usr/sbin/inetd /etc/inetd.conf
383 root 508 S /bin/ash /bin/tm-sh
384 root 504 S /bin/sh /etc/monitor
409 root 1236 S tm -i vnet0 pm -A
423 root 388 S cat /dev/ss_mem
424 root 1736 S pm -A
426 root 552 S /bin/sh /apps/usr/sbin/core_mover.sh
437 root 2152 S vrrp
459 root 1672 S tftpd -lD -s /tftp
460 root 1448 S statsagent
465 root 2076 S statlogd -c
470 root 2368 S ribmgr ribmgr initial
471 root 2428 S srm srm initial
472 root 29324 S snort -A NONE -N -i eth0 -c/apps/etc/snort/snort.con
487 root 1952 S aclmgr aclmgr initial
488 root 2120 S rip rip initial
489 root 2108 S pvstd
490 root 1652 S pppoed
491 root 2128 S pluto --nofork --nat_traversal
492 root 2548 S pim pim pim
493 root 2048 S ospfd ospfd initial
494 root 2272 S nhrpd
495 root 2180 S mcribmgr mcribmgr initial