EasyManua.ls Logo

Alcatel-Lucent OmniAccess 5740 - Option Subnet-Mask; Option Tftp-Server

Alcatel-Lucent OmniAccess 5740
1043 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DHCP (Dynamic Host Configuration Protocol) Server
Left running head:
Chapter name (automatic)
942
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
OPTION SUBNET-MASK
option subnet-mask <subnet-mask>
DESCRIPTION
This command is entered in the DHCP Pool Configuration Mode. This command
is used to configure the client's subnet mask.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config-dhcp-pool-p1)# option subnet-mask 255.255.255.0
OPTION TFTP-SERVER
option tftp-server <string>
DESCRIPTION
This command is entered in the DHCP Pool Configuration Mode. This command
is used to configure the IP address/domain name of the TFTP server.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config-dhcp-pool-p1)# option tftp-server 3.2.2.1
Parameter Description
subnet-mask Subnet mask for the pool.
Parameter Description
string IP address/domain name of the TFTP
server.

Table of Contents

Other manuals for Alcatel-Lucent OmniAccess 5740

Related product manuals