Virtual Routing and Forwarding
Left running head:
Chapter name (automatic)
638
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
ADDRESS FAMILY
address-family ipv4 unicast [vrf <vrf-name>]
DESCRIPTION
This command is entered in the BGP Routing Configuration mode.
This command associates the address family with the VRF and enters the
address-family configuration mode. If the VRF name is not specified, then the
configurations are associated with the Default VRF.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# router bgp 30
ALU(config-router bgp AS30)# address-family ipv4 unicast vrf
ALU_vrf
ALU(config-router-af-ucast)#
RELEASE HISTORY
Release 2.3: command was introduced.
Parameter Description
ipv4 Address family.
unicast Address family modifier.
vrf-name The name of the VRF to which the
address family is to be associated.
To Next Page
Loading...
