Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

qos credits debug
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
899
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
QOS CREDITS DEBUG
qos credits debug
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command is used to get the credits used for all the interfaces.
PARAMETERS
None.
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# qos credits debug
RELEASE HISTORY
Release 2.3: command was added.
QOS-PRECLASSIFY
qos-preclassify
DESCRIPTION
This command is entered in the Tunnel Interface Mode. This command is used to
enable pre-classification on the tunnel interface.
PARAMETERS
None.
DEFAULT VALUE
None.
EXAMPLE
ALU(config)# interface tunnel 1
ALU(config-tunnel1)# qos-preclassify

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English