Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

System Configuration and Monitoring
Left running head:
Chapter name (automatic)
90
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
RADIUS-SERVER AUTH-PORT
radius-server auth-port <0-65535>
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
specify a global authentication port that will be applied to all the Radius Server
groups (provided there is no server specific port configured).
PARAMETERS
DEFAULT VALUE
The default authentication port is 1812.
EXAMPLE
ALU(config)# radius-server auth-port 1800
RADIUS-SERVER DEADTIME
radius-server deadtime <1-1440>
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
specify a global deadtime value that will be applied to all the RADIUS Server
groups (provided there is no server specific deadtime configured).
PARAMETERS
DEFAULT VALUE
The default deadtime value is 5 minutes.
EXAMPLE
ALU(config)# radius-server deadtime 10
Parameter Description
auth-port <0-65535> Destination port on which RADIUS
server is listening.
Parameter Description
deadtime <1-1440> The time (in minutes) that should elapse,
before you try again to connect to a non-
responding server.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English