Alcatel-Lucent OmniAccess 5740 - Aggregate-Address

aggregate-address
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
493
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
AGGREGATE-ADDRESS
aggregate-address {<ip-address subnetmask>|<ip-address/prefix-
length>} [{{suppress-map|advertise-map|attribute-map|route-map}
<map-name>}|as-set|summary-only}]
DESCRIPTION
This command is entered in the Address Family or Router Configuration Mode.
This command configures BGP aggregate entries.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config-router bgp AS30)#aggregate-address 35.0.0.0/8
advertise-map admap1
Parameter Description
address Aggregate IP address.
mask Aggregate IP address mask.
as-set Generates autonomous system set path information.
summary-only Advertises summary addresses only.
suppress-map Route map used to selectively suppress routes in the
aggregate range.
advertise-map Name of the route map to create AS-SET origin
communities.
attribute-map Name of route map used to set the attribute of the
aggregate route.
map-name Name of the route map.