Alcatel-Lucent OmniAccess 5740 - Show Ppp Timeout Configuration

Point to Point Protocol
Left running head:
Chapter name (automatic)
310
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW PPP TIMEOUT CONFIGURATION
show ppp timeout configuration Serial <slot/port:channel>
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode.
Displays the timer and counter configuration information for a specified interface.
PARAMETERS
EXAMPLE
ALU# show ppp timeout configuration Serial 0/0:0
PPP Restart timer: 3 (sec)
PPP Max Terminate: 2
PPP Max Configure: 10
PPP Max Failure : 5
Parameter Description
<slot/port:channel> Slot, port and channel group number of the
serial interface.