Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

IP Security - Virtual Private Network
Left running head:
Chapter name (automatic)
804
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
IKE-IDENTITY
ike-identity <name>
DESCRIPTION
This command is entered in the IPsec Profile Configuration Mode. This command
attaches an IKE identity to an IPsec profile.
PARAMETERS
DEFAULT VALUE
IKE identity should only be attached to an IPsec profile if the Authentication type is
‘rsa-sig’
EXAMPLE
ALU(ipsec-profile-PF1)# ike-identity ID01
IKE-POLICY
ike-policy <name>
DESCRIPTION
This command is entered in the IPsec Profile Configuration Mode. This command
is used to attach an already configured IKE policy to an IPsec profile.
PARAMETERS
DEFAULT VALUE
If no IKE policy is attached to an IPsec profile, ‘default’ IKE policy is used.
EXAMPLE
ALU(ipsec-profile-PF1)# ike-policy IKE1
Parameter Description
name Name of the IKE identity.
Parameter Description
name Name of the IKE policy.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English