Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

network-id
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
817
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
NETWORK-ID
network-id <1-65535>
DESCRIPTION
This command is entered in the Client Object Configuration Mode. This command
is used to configure NHRP network identifier.
Note: All NHRP domains/stations within a logical NBMA network should be configured with
the same network identifier.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-nhrp-alu-dmvpn)# network-id 100
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
1-65535 Specify the NHRP network identifier.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English