Alcatel-Lucent OmniAccess 5740 - Show Ip Igmp Groups

show ip igmp groups
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
625
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW IP IGMP GROUPS
show ip igmp groups [<group-address>] [<interface-name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays all the multicast groups joined. You can enter the interface
name to see multicast groups on that interface.
PARAMETERS
EXAMPLE
ALU# show ip igmp groups
Interface Group-Address Last-Reporter Uptime Expires(sec:msec)
GigabitEthernet3/0 224.1.1.1 3.3.3.4 0:0:51 217:89
GigabitEthernet3/1 224.0.1.40 5.5.5.5 4:12:42 147:509
GigabitEthernet3/1 225.5.5.5 5.5.5.5 0:0:7 252:620
Parameter Description
group-address Displays only specified group information.
interface-name Displays groups on the specified interface.