Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

snmp system
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
143
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SNMP SYSTEM
snmp system {contact <contact-details>|location <location>|
name <name>}
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure the SNMP system contact details, system’s physical location
information and SNMP system name.
PARAMETERS
EXAMPLE
ALU(config)# snmp system contact support@alcatel-lucent.com
Parameter Description
contact-details Contact details of the SNMP system.
location Physical location of the SNMP system.
name Name of the SNMP system.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English