Network Address Translation
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
671
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
CHAPTER 30 NETWORK ADDRESS TRANSLATION
This chapter provides Network Address Translation (NAT) Command Line
Interface (CLI) commands.
The commands referring to the SNAT and DNAT are alphabetically
arranged.
This chapter provides a terse overview of the CLI syntax needed to configure the
Source and Destination NAT. For more detailed information about using and
configuring the NAT, refer to the OmniAccess 5740 Unified Services Gateway
CLI Configuration Guide.
To Next Page
Loading...
