System Configuration and Monitoring
Left running head:
Chapter name (automatic)
120
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW LOGGING TAG
show logging tag <tag-name>
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode.
Displays the log messages in reference to the tag value. The tag is the module
that generated the log. The tag name is case insensitive.
PARAMETERS
EXAMPLE
The following example shows messages from a particular module, say, CLI
ALU
> show logging tag cli
2005 Oct 13 03:49:59: %CLI-6-LOG: User: successfully entered into Super user mode
2005 Oct 13 10:44:47: %CLI-6-LOG: A Client Logged in to the Box through SSH from
10.91.2.87
2005 Oct 13 10:45:41: %CLI-6-LOGSRV: Logging buffer size set to 128K by
User:privileged user.
Parameter Description
tag-name The tag-value can be “BGP” “RIP” “FW”
“ChassisMgr”, etc. All the messages
relating to the these modules will be
displayed.
To Next Page
Loading...
