Alcatel-Lucent OmniAccess 5740 - No Ppp Authentication Password; No Ppp Authentication Username; No Ppp Ipcp Address Accept-Local; No Ppp Ipcp Address Accept-Peer

no ppp authentication password
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
291
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
NO PPP AUTHENTICATION PASSWORD
no ppp authentication password
This command is entered in the Interface Configuration Mode. The “no” command
deletes the configured PPP authentication password on the server side.
NO PPP AUTHENTICATION USERNAME
no ppp authentication username
This command is entered in the Interface Configuration Mode. The “no”
command deletes the configured PPP authentication user name on the server
side.
NO PPP IPCP ADDRESS ACCEPT-LOCAL
no ppp ipcp address accept-local
This command is entered in the Interface Configuration Mode. The “no” command
sets the flag to reject the local IP address given to it by its peer during IPCP. This
is the default behavior.
NO PPP IPCP ADDRESS ACCEPT-PEER
no ppp ipcp address accept-peer
This command is entered in the Interface Configuration Mode. The “no” command
sets the flag to reject the peer’s IP address during IPCP.
Note: On a PPPoE enabled interface, ‘no ppp ipcp address accept-peer’ should not be
configured as the interface is always in PPPoE client mode.
NO PPP IPCP ADDRESS POOL LOCAL
no ppp ipcp address pool local
This command is entered in the Interface Configuration Mode. The “no” command
removes the IP address pool for IPCP.