Alcatel-Lucent OmniAccess 5740 - Show Ip Bgp Flap-Statistics; Show Ip Bgp Inconsistent-As

show ip bgp flap-statistics
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
539
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW IP BGP FLAP-STATISTICS
show ip bgp flap-statistics [{<ip-address>|<ip-address/mask>|
cidr-only|regexp <regexp>|filter-list <1-199>}]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays the BGP flap statistics of routes.
PARAMETERS
EXAMPLE
ALU# show ip bgp flap-statistics
BGP local router ID is 111.111.111.111
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
Prefix/len From Flaps Duration Reuse Path
* d 7.0.0.0/8 1.1.1.2 2 00:10:48 00:17:50 100i
* d 118.0.0.0/24 111.111.111.112 1 00:06:08 00:22:00 300?
ALU#
SHOW IP BGP INCONSISTENT-AS
show ip bgp inconsistent-as
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays the routes with inconsistent originating autonomous systems.
PARAMETERS
None.
EXAMPLE
ALU# show ip bgp inconsistent-as
Parameter Description
ip-address Network in the BGP routing table.
ip-address/mask Network mask applied to the address.
cidr-only Displays the routes with non-natural netmasks.
regexp Displays routes for all the AS paths that match the regular
expression.
1-199 Displays routes conforming to the filter list.