High-level Data Link Control
Left running head:
Chapter name (automatic)
270
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
DEBUG HDLC ALL
debug hdlc all [detail-level <1-9>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command shows all the debug messages pertaining to HDLC functionality.
PARAMETERS
DEFAULT VALUE
By default, debug is disabled.
EXAMPLE
ALU(config)# debug hdlc all
Parameter Description
all Displays all the debug messages
pertaining to HDLC functionality.
detail-level Displays detail level (default is 1).
1-9 Enable with specific detail level.
To Next Page
Loading...
