Alcatel-Lucent OmniAccess 5740 - Package Install Flash

System Configuration and Monitoring
Left running head:
Chapter name (automatic)
84
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
PACKAGE INSTALL FLASH
package install flash {fpkey:|ftp:|http:|https:|tftp:|user:|vrf
<vrf-name>}
DESCRIPTION
This command is entered in the Configuration Mode. This installs a LoL flash
image on all the cards. The package file can be obtained from user area or it can
be obtained from a remote site using FTP, TFTP, HTTP, HTTPS, or through an
interface associated with the specified VRF.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
The following command installs a flash image from the user area:
ALU(config)# package install flash user:
Path/Filename : alu_fw-5740-2.2.71.npm
The system will need to reboot after a flash upgrade
Do you want to continue? (y/[n]) : y
Do you want to save config before proceeding ([y]/n) : n
Verifying and Extracting LoL image
==================================
Checking for free space in User area...OK
Extracting LoL image...OK
Verifying and Decompressing flash images
========================================
Parameter Description
fpkey: Install the flash image from fpkey:
ftp: Download the flash image to be installed
through ftp from remote file system.
http: Download the flash image to be installed
through http from remote file system.
https: Download the flash image to be installed
through https from remote file system.
tftp Download the flash image to be installed
through tftp from remote file system.
user: Install the flash image from user area.
vrf-name Download the flash image to be installed
through an interface associated with the
specified VRF.