aaa server-group tacacs
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
49
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
AAA SERVER-GROUP TACACS
aaa server-group tacacs <name>
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure a TACACS+ server group. This command enters the TACACS+ Server-
Group mode.
Note: You cannot enter a TACACS+ server group as ‘local’ or ‘enable’, as they are reserved
keywords for pre-defined authentication methods.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config)# aaa server-group tacacs tac1
ALU(config-srv-grp-tac1)#
Parameter Description
name Name of the TACACS+ server group.
To Next Page
Loading...
Need help?
General
