System Configuration and Monitoring
Left running head:
Chapter name (automatic)
96
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SAVE RUNNING-CONFIG FILE-NAME
save running-config <file-name>
DESCRIPTION
This command is entered in the Configuration Mode. This command saves the
running configuration under the specified file name in the config directory.
PARAMETERS
EXAMPLE
ALU# save running-config my-config
Saving to my-config ...
SAVE LOGGING
save logging
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
save the information in the log buffer. By default, the information is saved in the
user:log/default.log file.
PARAMETERS
None.
EXAMPLE
ALU# save logging
Parameter Description
file-name Name of the file where you want to save the
running configuration.