T1E1 Line Card
Left running head:
Chapter name (automatic)
252
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
CONTROLLER
controller {E1|T1} <slot/port>
DESCRIPTION
This command is entered in the Configuration Mode. This command configures
an E1 or T1 controller.
PARAMETERS
EXAMPLE
ALU(config)# controller T1 0/0
ALU(config-controller T1)#
Parameter Description
E1|T1 Use T1 keyword to configure a T1
controller. T1 has a transmission rate of
1.544 Mbps.
slot Enter the specified slot number.
port Enter the appropriate port number.
To Next Page
Loading...
