Alcatel-Lucent OmniAccess 5740 - Requested-Address

DHCP (Dynamic Host Configuration Protocol) Client
Left running head:
Chapter name (automatic)
962
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
REQUESTED-ADDRESS
requested-address <ip-address>
DESCRIPTION
This command is entered in the DHCP Client Configuration Object Mode. This
command is used to configure the DHCP option 'requested-address'. Client sends
this option to the server to request a specific IP address from the server.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config–dhcp-client-client1)# requested-address 10.10.10.10
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
ip-address Specify the IP address requested from the
server.