Alcatel-Lucent OmniAccess 5740 - Show Eth-Cfm Mep - 1 Dm-Test-Results

Ethernet OAM (Operations, Administration, and Maintenance)
Left running head:
Chapter name (automatic)
368
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW ETH-CFM MEP - 1DM-TEST-RESULTS
show eth-cfm mep <1-8191> domain <0-65535> association <0-
65535> 1DM-test-results remote-peer-mac <mac-address>
DESCRIPTION
This is entered in the Super User Mode or Configuration Mode. This command
displays the MEP, MA's, MD's, result of the one-way delay test.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# show eth-cfm mep 100 domain 100 association 100 1DM-test-results
remote-peer-mac 00e0.b1c6.df2a
------------------------------------------------------------------------
1DM Test Result
------------------------------------------------------------------------
PEER MAC Delay(microseconds) Variation(microseconds)
00:e0:b1:c6:df:2a 4060307296 234660000
------------------------------------------------------------------------
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
1-8191 An integer, unique over a given MA,
identifying a specific MEP.
domain <0-65535> An unique integer identifying a specific
maintenance domain.
association <0-65535> An unique integer identifying a specific
maintenance association.
mac-address MAC address for a MEP on the remote
peer.