show eth-cfm mep - loopback and linktrace
Except on the first page, right running head:  
Heading1 or Heading1NewPage text (automatic)
367
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
---------------------------------------------------------
MEP Linktrace Replies
---------------------------------------------------------
SequenceNumber: 1       ReceivedOrder: 1
Ttl: 63 Forwarded: True
LastEgressId: 0000:00e0:b1c6:df2a       TerminalMep: False
NextEgressId: 0000:4692:0101:0001       Relay: rlyFdb
ChassisId: None
ManAddressDomain: None
ManAddress: None
IngressMac: 0000:0000:0000      IngressPortIdSubType: None
IngressPortId: None
EgressMac: 4692:0101:0001       EgressAction: EgrOk
EgressPortIdSubType: None
egressPortId: None
OrgSpecificTlv: None
ALU(config)# show eth-cfm mep 10 domain 100 association 100 loopback
---------------------------------------------------------
MEP Information
---------------------------------------------------------
        md_Index: 100
        ma_Index: 100
        mep_Index: 10
        Interface Name: GigabitEthernet 3/0   AdminState: Up  Direction: Down
        MacAddress: 00e0.b1c6.df2a
        CCM Enable: Enabled
        CCM/LTM Priority: 0     CcmTx: 79641    CcmSequenceErr: 32
        AlarmSet Time: 250      AlarmReset Time: 250
        LowestPrior Defect:  DefMACstatus  DefRemoteCCM  DefErrorCCM  DefXconCCM
        HighestDefect:  DefNone
        Defect Flags:  DefNone
        AIS-Enable: Disabled
        AIS Priority: 1 AIS Interval: 1 AIS Level: 0
---------------------------------------------------------
MEP LoopBack Information
---------------------------------------------------------
LbRxReply: 1            LbRxBadOrder: 0
LbRxBadMsdu: 0          LbTxReply: 0
LbStatus: False         LbResult: True
DestIsMepId: False              DestMepId: 10
SendCount: 0            VlanDropEnable: 0
SequenceNum: 2          NextSequenceId: 2
DestMac: 0000:0000:0000         VlanPriority: 0
DataTLV: None
---------------------------------------------------------
RELEASE HISTORY
Release 3.0: command was introduced.