Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

show ip-policy
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
635
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW IP-POLICY
show ip-policy [<name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command is used to view all the IP policies configured in the system. This
command also displays interfaces on which these policies are applied.
PARAMETERS
EXAMPLE
ALU(config)# show ip-policy
!
! IP-Policy configuration
!
ip-policy pbr1
10 match any m1 m2 interface GigabitEthernet3/0 next-hop
1.2.2.1
exit
!
interface GigabitEthernet3/1
ip-policy pbr1
exit
Parameter Description
name Displays the details of a specific IP
policy.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English