Alcatel-Lucent OmniAccess 5740 - Transparent-Forward <Name; Pass-Through Protocol

transparent-forward <name>
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
877
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
TRANSPARENT-FORWARD <NAME>
transparent-forward <name>
DESCRIPTION
This command is entered in the Configuration Mode. This command is used to
configure a TF policy.
PARAMETERS
EXAMPLE
ALU(config)# transparent-forward TF1
ALU(config-transparent-forward-TF1)#
PASS-THROUGH PROTOCOL
pass-through protocol {<1-65535>|appletalk|ipx|nonip}
DESCRIPTION
This command is entered in the TF-Configuration Mode. This command is used to
define how the non-IP packets can be configured to be bridged across the
transparent firewalling interfaces. Currently, IPX and Apple-talk protocols are not
supported.
Using this command more than once will add the protocol to existing configured
protocols.
PARAMETERS
EXAMPLE
ALU(config-transparent-forward-TF1)# pass-through protocol
nonip
Parameter Description
name Name for the TF policy being configured.
Parameter Description
1-65535 Protocol number.