Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

set metric
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
451
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SET METRIC
set metric <0-4294967295>
DESCRIPTION
This command is entered in the Route-Map Configuration Mode. This sets the
metric value to the redistributed routes. This command is normally used in route-
maps for redistribution.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config-route-map)# set metric 10
SET METRIC-TYPE
set metric-type {internal|external|type-1|type-2}
DESCRIPTION
This command is entered in the Route-Map Configuration Mode. This command
sets the metric type of the redistributed routes.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config-route-map)# set metric-type type-1
Parameter Description
0-4294967295 Metric value.
Parameter Description
internal Internal metric value.
external External metric value.
type-1 OSPF external type-1 metric.
type-2 OSPF external type-2 metric.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English