Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

tunnel vrf
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
873
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
TUNNEL VRF
tunnel vrf {<vrf-name>|default}
DESCRIPTION
This command is entered in the Interface Configuration Mode. This command
allows to resolve the tunnel source and tunnel destination from the specified VRF
instead of the VRF associated with the tunnel interface.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-if Tunnel7)# tunnel vrf ALU-vrf1
RELEASE HISTORY
Release 2.3: command was introduced.
Parameter Description
vrf-name Name of the VRF different from the VRF
associated with the tunnel interface.
default Default VRF.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English