ccm-interval
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
341
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
CCM-INTERVAL
ccm-interval {10m|10s|1m|1s}
DESCRIPTION
This is entered in the OAM Domain Association Configuration Mode. This
command is used to configure the time interval between two CCMs for a
maintenance association. This interval will be applied to all the MEPs within a MA.
PARAMETERS
DEFAULT VALUE
The default CCM interval is 1 second.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-oam-domain-assoc)# ccm-interval 1m
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
10m|10s|1m|1s Specify the time interval between two
CCMs (seconds or minutes).
To Next Page
Loading...
