Router Information Protocol
Left running head:
Chapter name (automatic)
476
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
NO PASSIVE-INTERFACE
no passive-interface {<interface-name>|default}
This command is entered in the Router Configuration Mode. The above command
disables the configured passive interfaces.
NO REDISTRIBUTE
no redistribute {bgp <1-65535>|connected|ospf <1-65535> [match
{{external|nssa-external}[1|2]|internal}]|static} [metric {<1-
16> |transparent}|route-map <route-map reference>]
This command is entered in the Router Configuration Mode. This command
disables the redistribution of routes.
NO TIMERS BASIC
no timers basic
This command is entered in the Router Configuration Mode. This command
removes the configured routing timers.
NO VALIDATE-UPDATE-SOURCE
no validate-update-source
This command is entered in the Router Configuration Mode. Disables the
validation of the source IP address of the incoming RIP routing updates. By
default, RIP validates the source IP address of incoming RIP routing updates
NO VERSION
no version
This command is entered in the Router Configuration Mode. This command
resets the configured routing protocol version.
NO IP RIP V2-BROADCAST
no ip rip v2-broadcast
This command is entered in the Interface Configuration Mode. The ‘no’ command
disables sending of routing updates to broadcast address.
To Next Page
Loading...
Need help?
General
