Alcatel-Lucent OmniAccess 5740 - Show Eth-Cfm Mep - Eth-Test-Results

Ethernet OAM (Operations, Administration, and Maintenance)
Left running head:
Chapter name (automatic)
370
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW ETH-CFM MEP - ETH-TEST-RESULTS
show eth-cfm mep <1-8191> domain <0-65535> association <0-
65535> eth-test-results remote-peer-mac <mac-address>
DESCRIPTION
This is entered in the Super User Mode or Configuration Mode.This command
displays the MEP, MA's, MD's, Ethernet test results.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# show eth-cfm mep 100 domain 100 association 100 eth-test-results
remote-peer-mac 00e0.b1c6.df2a
---------------------------------------------------------
MEP eth-test Results Information
---------------------------------------------------------
mepIndex : 100 mdIndex : 100
maIndex : 100 peerMacAddr : 0:e0:b1:c6:df:2a
frameCount : 1 byteCount : 64
bitErrs : 0 crcErrs : 0
AccBitErrs : 0 AccCrcErrs : 0
---------------------------------------------------------
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
1-8191 An integer, unique over a given MA,
identifying a specific MEP.
domain <0-65535> An unique integer identifying a specific
maintenance domain.
association <0-65535> An unique integer identifying a specific
maintenance association.
mac-address MAC address for a MEP on the remote
peer.