show ip ospf flood-list
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
589
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW IP OSPF FLOOD-LIST
show ip ospf flood-list [<interface-name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays a list of LSAs waiting to be flooded over an interface.
PARAMETERS
EXAMPLE
ALU# show ip ospf flood-list
OSPF Router with ID (1.1.1.2) (Process ID 1)
Interface GigabitEthernet 3/0, Queue length 1
Type LS ID ADV RTR Seq NO Age Checksum
1 1.1.1.2 1.1.1.2 0x8000001D 0 0x04EA
ALU#
Parameter Description
interface-name Interface name with its slot and port
number.
Parameter Description
Interface GigbitEthernet Interface for which information is
displayed.
Queue length Number of LSAs waiting to be flooded.
Type Type of LSA.
LS ID Link-state ID of the LSA.
ADV RTR Router ID of the advertising router.
Seq NO Sequence number of the LSA.
Age Age of LSA (in seconds).
Checksum Checksum of LSA.
To Next Page
Loading...
Need help?
General
