Alcatel-Lucent OmniAccess 5740 - Virtual Routing and Forwarding (VRF)

System Configuration and Monitoring
Left running head:
Chapter name (automatic)
78
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
NO RADIUS-SERVER KEY
no radius-server key
This command is entered in the Configuration Mode. The ‘no’ command deletes
the global RADIUS key from the configuration, and resets it to default (for all
servers that do not have a server specific key).
NO RADIUS-SERVER RETRANSMIT
no radius-server retransmit
This command is entered in the Configuration Mode. The ‘no’ command deletes
the global RADIUS retransmit value from the configuration, and resets it to default
(for all servers that do not have a server specific retransmit value).
NO RADIUS-SERVER TIMEOUT
no radius-server timeout
This command is entered in the Configuration Mode. The ‘no’ command deletes
the global RADIUS timeout value from the configuration, and resets it to default
(for all servers that do not have a server specific timeout value).
NO SERVICE TIMESTAMPS LOG
no service timestamps log
This command is entered in the Configuration Mode. This command disables the
date and time display in the log messages.
NO SNMP AGENT
no snmp agent {rocommunity|rwcommunity}
This command is entered in the Configuration Mode. This command removes
read-only/read-write community string configured on the SNMP agent.
NO SNMP-SERVER ACCESS
no snmp-server access <group-name> security-model {v1|v2c|v3}
{auth|noauth|priv}
This command is entered in the Configuration Mode. This command removes the
access control configuration.
NO SNMP-SERVER GROUP
no snmp-server group <group-name> <security-name> security-
model {v1|v2c|v3}
This command is entered in the Configuration Mode. This command removes the
configured USM group.