Alcatel-Lucent OmniAccess 5740 - Show Route-Map

show route-map
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
461
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW ROUTE-MAP
show route-map [<route-map name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays the route-map configuration.
PARAMETERS
EXAMPLE
ALU# show route-map
route-map test, permit, sequence 1
Description:
Exit Policy:
Match clauses:
community (community-list filter) : 1
ip address (access-lists) : prefix-list testprefix
Set clauses:
route-map test, deny, sequence 2
Description:
Exit Policy:
Match clauses:
Set clauses:
ALU#
ALU# show route-map testset
route-map testset, permit, sequence 5
Description:
Exit Policy:
Match clauses:
ip address (access-lists) : 1
Set clauses:
metric 10
route-map testset, permit, sequence 10
Description:
Exit Policy:
Match clauses:
Set clauses:
metric 20
ALU#
Parameter Description
route-map name Name of a specific route map whose configuration details
are to be viewed.