Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

eth-test
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
351
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
ETH-TEST
eth-test {enable|disable}
DESCRIPTION
This is entered in the OAM Domain Association MEP Configuration Mode. This
command is used to enable/disable Ethernet test signal on a MEP.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-oam-domain-assoc-mep)# eth-test enable
RELEASE HISTORY
Release 3.0: command was introduced.
Parameter Description
enable|disable Enable/disable Ethernet test signal on a
MEP.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English