bgp write config
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
503
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
BGP WRITE CONFIG
bgp write config
DESCRIPTION
This command is entered in the Address Family or Router Configuration Mode.
This command shows BGP specific configuration details.
PARAMETERS
None.
DEFAULT VALUE
Disabled.
EXAMPLE
ALU(config-router bgp AS30)# bgp write config
router bgp 30
bgp enforce-first-as
!
address-family ipv4 unicast
aggregate-address 0.0.0.0/0
aggregate-address 35.0.0.0/8 attribute-map m1
exit-address-family
ALU(config-router bgp AS30)#
To Next Page
Loading...
