Alcatel-Lucent OmniAccess 5740 - Show Transparent-Forward

show transparent-forward
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
879
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SHOW TRANSPARENT-FORWARD
show transparent-forward [<name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command is used to view all the TF policies configured in the system.
If a TF policy is specified then the details of the specific TF policy is displayed.
This command also displays the interfaces on which these policies are applied.
PARAMETERS
EXAMPLE
ALU(config)# show transparent-forward
!
! Transparent-forward configuration
!
interface GigabitEthernet3/1
transparent-forward interface GigabitEthernet3/0
exit
!
transparent-forward tf
pass-through protocol nonip
exit
!
interface GigabitEthernet3/0
transparent-forward tf interface GigabitEthernet3/1
exit
!
ALU(config)#
Parameter Description
name Displays the details of a specific TF
policy.