pfs
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
835
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
PFS
pfs {group1|group2|group5}
DESCRIPTION
This command is entered in the Client Profile Configuration Mode. This command
is used to attach a PFS group to an IPsec client profile.
PARAMETERS
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config-client-prof-myclientprofile)# pfs group2
RELEASE HISTORY
Release 3.0: command was introduced in the Client Profile Configuraiton Mode.
Parameter Description
group1|group2|group5 PFS group.
To Next Page
Loading...
Need help?
General
