Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

encapsulation
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
265
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
ENCAPSULATION
encapsulation {frame-relay|ppp|hdlc|mlfr <bundle_id>|mlppp
<bundle_id>}
DESCRIPTION
This command is entered in the Interface Configuration Mode to set encapsulation
on the serial interface.
PARAMETERS
DEFAULT VALUE
Default is HDLC.
EXAMPLE
The following example sets the encapsulation to FR:
ALU(config-if Serial0/0)# encapsulation frame-relay
Parameter Description
frame-relay Sets the encapsulation to Frame Relay.
ppp Sets the encapsulation to Point to Point
Protocol.
hdlc Sets the encapsulation to High Level
Data Link Control.
mlfr <bundle_id> Sets the encapsulation to Multi-link
Frame Relay.
mlppp <bundle_id> Sets the encapsulation to Multi-link
Point-Point Protocol.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English