summary-address
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
601
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
SUMMARY-ADDRESS
summary-address {<ip-address subnet-mask|<ip-address/prefix-
length>} [not-advertise|tag <0-4294967295>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command specifies an address and mask that covers redistributed routes, so only
one summary route is advertised.
PARAMETERS
DEFAULT VALUE
None.
EXAMPLE
ALU(config-router ospf 30)# summary-address 20.0.0.0/8 tag 20
ALU(config-router ospf 30)# summary-address 10.0.0.0/8 not
advertise
Hello due in 00:00:04 When the next hello is expected from the
neighbor.
Adjacency State FULL The adjacency state between the
neighbors.
Retransmission queue Number of elements in the
retransmission queue. Number of times
update packets have been resent during
flooding.
Parameter Description
ip-address Summary address designated for a
range of addresses.
<ip-address subnet-mask|<ip-
address/prefix- length>
IP subnet mask or prefix length used for
the summary route.
not-advertise Use the optional not-advertise keyword
to filter out a set of routes.
0-4294967295 Tag value that can be used as a ‘match’
value for controlling redistribution via
route maps. This keyword applies to
OSPF only.
Parameter Description
To Next Page
Loading...
Need help?
General
