no encapsulation mlfr
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
335
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
NO ENCAPSULATION MLFR
no encapsulation mlfr <1-256>
This command is entered in the Interface Configuration Mode. This command
sets the encapsulation to its default., HDLC.
NO FRAME RELAY INTERFACE DLCI
no frame-relay interface-dlci <16-1007>
This command is entered in the Interface Configuration Mode. The “no” command
deletes the configured DLCI from the MLFR interface.
NO FRAME RELAY LMI TYPE
no frame-relay lmi-type {ansi|q933a}
This command is entered in the Interface Configuration Mode. The “no” command
sets the LMI type to its default value, auto-sense.
NO MLFR ACK INTERVAL
no mlfr ack-interval <1-10>
This command is entered in the Interface Configuration Mode. This command
resets the acknowledge interval to its default, 4 seconds.
NO MLFR BID
no mlfr bid <name>
This command is entered in the Interface Configuration Mode. This command
removes the configured bid name from the bundle interface.
NO MLFR HELLO INTERVAL
no mlfr hello-interval <1-180>
This command is entered in the Interface Configuration Mode. This command
resets the hello interval to its default value, 10 seconds.
NO MLFR LID
no mlfr lid <name>
This command is entered in the Interface Configuration Mode. This command
removes the configured LID name from the interface that is part of the bundle.
NO MLFR RETRY COUNT
no mlfr retry-count <1-5>
This command is entered in the Interface Configuration Mode. This command
resets the retry count to its default, 2.
To Next Page
Loading...
Need help?
General
