traceroute
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
667
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
TRACEROUTE
traceroute [vrf <vrf-name>] {<ip-address>|<hostname>}
DESCRIPTION
This command is entered in the Configuration Mode. Traceroute command is
used for figuring out the path taken by the IP packet.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config)# traceroute vrf ALU-vrf 1.2.3.1
RELEASE HISTORY
Release 2.3: parameter vrf <vrf-name> was added.
Parameter Description
vrf-name If the VRF name is specified, the packets
will be routed using the routing table of
the specified VRF on a interface
associated with the VRF.
ip-address IP address of the host.
hostname Name of the host.
To Next Page
Loading...
Need help?
General
