Protocol Independent Features
Left running head:
Chapter name (automatic)
456
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
SHOW IP PROTOCOLS
show ip protocols [vrf <vrf-name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. This
command displays the parameters and current state of the active routing protocol
process.
PARAMETERS
EXAMPLE
ALU# show ip protocols
Routing Protocol is "rip"
Sending updates every 30 seconds, next due in 27 seconds
Invalid after 180 seconds, hold down 180, flushed after 240 seconds
Default redistribution metric is 3
Redistributing External Routes from:
connected metric 3
static metric 4
Default version control: send version 2, receive version 2
Automatic network summarization is in effect
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Interface Send Recv Key-chain
GigabitEthernet3/1 2 2
loopback1 2 2
Routing for Networks:
1.0.0.0
4.0.0.0
Routing Information Sources:
Gateway Interface Distance Last Update
1.1.1.1 GigabitEthernet3/1 115 00:00:00
Distance: (default is 120)
Field Description
vrf-name Name of the VRF.
Field Description
Routing Protocol
is ‘RIP’
Specifies the routing protocol used.
Sending updates
every 30 seconds
Specifies the time between sending updates.
next due in 2
seconds
Precisely when the next update is due to be sent.
Invalid after
180 seconds
Specifies the value of the invalid parameter.
To Next Page
Loading...
