Alcatel-Lucent OmniAccess 5740 - Peer-ID; Pfs

peer-id
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
783
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
PEER-ID
peer-id {dn|fqdn|user-fqdn} <name>|address <ip-address>
DESCRIPTION
This command is entered in the ike-identity mode. This command configures an
ID for the peer.
PARAMETER
EXAMPLE
ALU(config-ike-identity-exampleidentity)# peer-id user-fqdn
selma_bouvier@alu.com
PFS
pfs [group1|group2|group5]
DESCRIPTION
This command when entered in the IKE Policy Configuration Mode configures a
PFS group.
This command when entered in the Crypto Map Configuration Mode attaches a
PFS group to a crypto map.
PARAMETER
DEFAULT VALUE
If the PFS group is not explicitly configured, the default group2 is used.
EXAMPLE
ALU(config-crypto-ike-policy-P1)# pfs group1
ALU(config-crypto-map-exampleMap)# pfs group1
parameter Description
name Name of the peer certificate imported
previously.
ip-address IP address of the peer.
Parameter Description
group1|group2|group5
Name of the PFS group.