Intrusion Detection/Intrusion Prevention System
Left running head:
Chapter name (automatic)
844
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
CLEAR FIREWALL INTRUSION SNORT STATISTICS
clear firewall intrusion snort statistics [<interface-name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. Use
this command to clear Snort statistics.
PARAMETER
EXAMPLE
ALU#clear firewall intrusion snort statistics
CLEAR FIREWALL INTRUSION SNORT STATISTICS PREPROCESSOR
clear firewall intrusion snort statistics preprocessor [{back-
orifice|http-inspect|rpc|stream4}]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. Use
this command to clear the Snort preprocessor statistics.
PARAMETER
EXAMPLE
ALU#clear firewall intrusion snort statistics preprocessor
http-inspect
Note: Currently, preprocessor attacks of type rpc and stream4 is not supported.
Parameter Description
interface-name Name of the interface.
Parameter Description
http-inspect The preprocessor that acts as generic
HTTP decoder.
back-orifice The preprocessor that is used to prevent
buffer over flow attack.
rpc The preprocessor that normalizes RPC
fragmented records.
stream4 The preprocessor that is used for
reassembly.
To Next Page
Loading...
Need help?
General
