Alcatel-Lucent OmniAccess 5740 - Rule Prevention; Show Firewall Intrusion Sensor

Intrusion Detection/Intrusion Prevention System
Left running head:
Chapter name (automatic)
854
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
RULE PREVENTION
rule prevention {{{category <name>|classtype <name>| priority
{high|low|medium}|reset {category <name>|classtype <name>|
priority {high|low|medium}}}
DESCRIPTION
This command is entered in the Intrusion Snort Configuration Mode. This
command enables you to modify the group level prevention.
PARAMETER
EXAMPLE
ALU(config-firewall-intrusion-snort)#rule prevention category
attack-responses
SHOW FIREWALL INTRUSION SENSOR
show firewall intrusion sensor [<name>]
DESCRIPTION
This command is entered in the Super User Mode or Configuration Mode. Use
this command to view instruction sensor configuration details.
PARAMETER
EXAMPLE
ALU# show firewall intrusion sensor
firewall
intrusion sensor sensor1 snort
intrusion sensor sensor4 snort
intrusion sensor s1 snort
Parameter Description
category <name> Name of the Snort rule category.
class-type <name> Name of the Snort rule class type.
priority {high|low|medium} Snort rule priority: low, high or medium.
Parameter Description
name Name of the sensor.