Dynamic DNS (DDNS) Client
Left running head:
Chapter name (automatic)
986
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
HTTP
http
DESCRIPTION
This command is entered in the DDNS Method Configuration Mode. This
command is used to configure the HTTP as the update method. This enters the
DDNS HTTP configuration mode.
PARAMETERS
None.
DEFAULT VALUE
None.
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
ALU(config–ddns-myDdnsObj)# http
RELEASE HISTORY
Release 3.0: command was introduced.