Alcatel-Lucent OmniAccess 5740 Cli Command Reference Guide

System Configuration and Monitoring
Left running head:
Chapter name (automatic)
82
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Command Reference Guide
Alcatel-Lucent
PACKAGE INSTALL
package install {fpkey:|ftp:|http:|https:|tftp:|user:|vrf <vrf-
name>}
DESCRIPTION
This command is entered in the Configuration Mode. This command installs a
release or a component package from the given location. The package file can be
obtained from user area or fpkey: or it can be obtained from a remote site using
FTP, TFTP, HTTP, HTTPS, or through an interface associated with the specified
VRF.
PARAMETERS
PLATFORMS SUPPORTED
OmniAccess 5740 USG
EXAMPLE
The following command installs a package after downloading it from remote site
using ftp:
ALU(config)# package install ftp:
Remote Host : 10.91.0.87
Remote Port [ Enter for default ] :
Path/Filename : /packages/alu-apps.740.3.0.0.82.0.npm
Username [Enter for none] : user1
Password :
Downloading remote file. This could take a while...
Verifying package... NPM v1.0 format
OK.
Checking the package type ... Release: 3.0.0.82.0
Parameter Description
fpkey: Install the package from fpkey:
ftp: Download the package to be installed
through ftp from remote file system.
http: Download the package to be installed
through http from remote file system.
https Download the package to be installed
through https from remote file system.
tftp Download the package to be installed
through tftp from remote file system.
user: Install the package from user area.
vrf-name Download the package to be installed
through an interface associated with the
specified VRF.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English